821 Champion Pulling Swivels | Stainless Steel
821 Champion Pulling Swivels — Product Overview
The Condux 821 Champion Pulling Swivels are precision-machined stainless steel swivels designed for underground and overhead utility cable pulling applications. Available in four sizes, these swivels feature clevis connections with replaceable pins and separate manufacturer-rated working loads for underground and aerial use.
Applications: Designed for cable stringing or pulling. Underground and aerial applications have different published working-load limits and safety factors.
Important Safety Note: For cable stringing or pulling only. These swivels are not designed to be pulled around bullwheels or sheaves. Observe the manufacturer's specified working-load limits.
Key Features
- Stainless Steel Construction: Precision-machined stainless steel swivel assemblies.
- Underground and Aerial Applications: Separate manufacturer-rated working loads for both applications.
- Replaceable Clevis Pins: Manufacturer-listed replacement pins are available for all four swivel models.
- Four Swivel Sizes: Nominal sizes from .875" to 1.88".
- Application Restriction: Designed for cable stringing or pulling, not for travel around bullwheels or sheaves.
Ordering Information — Working Loads
The following working-load ratings are published by Condux. Underground ratings use a 3:1 safety factor; aerial ratings use a 5:1 safety factor.
| Part Number | Size (in) | Underground Load (lb) | Underground Load (N) | Aerial Load (lb) | Aerial Load (N) |
|---|---|---|---|---|---|
| 08210007 | .875" | 1,800 | 8,006 | 1,080 | 4,804 |
| 08210012 | 1.25" | 4,000 | 17,792 | 2,400 | 10,675 |
| 08210014 | 1.44" | 7,500 | 33,360 | 4,500 | 20,016 |
| 08210018 | 1.88" | 10,000 | 44,480 | 6,000 | 26,689 |
Swivel Compatibility Reference
The following table is based on the Condux Swivel Compatibility Chart. Match the exact swivel part number and connection type before selecting pulling eyes or connecting components.
| Swivel Part Number | Swivel Size (in) | Standard-Head Pulling Eye Cable Size | Fixed-Head Innerduct Pulling Eyes | Eye-to-Eye Connectors | Separate Leg Ends |
|---|---|---|---|---|---|
| 08210007 | .875" | — | — | — | .125", .25" |
| 08210012 | 1.25" | 1/0 AWG–250 kcmil | All (manufacturer chart) | .375": 08050300; .5": 08050500 | All (manufacturer chart) |
| 08210014 | 1.44" | 1/0 AWG–250 kcmil | All (manufacturer chart) | .375": 08050300; .5": 08050500 | All (manufacturer chart) |
| 08210018 | 1.88" | 350–1000 kcmil | — | All (manufacturer chart) | All (manufacturer chart) |
Compatibility Note: A dash indicates that no compatibility is listed in the relevant Condux chart column. "All" applies only to the specific component category defined in that chart. Refer to the complete Condux Swivel Compatibility Chart for large front links and other connection details. Pulling eyes, connectors, leg ends, and related components are sold separately.
Replacement Clevis Pins
The following replacement slotted clevis pins are listed by Condux for the 821 Champion Swivel models.
| Swivel Part Number | Replacement Clevis Pin Part Number |
|---|---|
| 08210007 | 08210105 |
| 08210012 | 08210115 |
| 08210014 | 08210125 |
| 08210018 | 08210135 |
Documentation
- Manufacturer Manual: 808 and 821 Champion Swivels Manual (PDF)