Swivel Head Innerduct Pulling Eye | Anti-Twist Design
Swivel Head Innerduct Pulling Eye | Integrated Swivel Design | Product Overview
The Swivel Head Innerduct Pulling Eye combines features of a standard innerduct pulling eye and a Condux swivel in one tool. Its integrated swivel head helps prevent twisting and binding of innerduct during installation, eliminating the need for a separate swivel on each pulling eye.
Designed for installing individual innerducts into separate conduits or multiple innerducts into a single conduit, its short overall length offers an advantage when working through tight bends. Install using a 1.375" deep socket or adjustable wrench.
Important sizing note: Measure the actual innerduct inside diameter (I.D.) before selecting a pulling eye. The measured I.D. must be greater than dimension A and smaller than dimension B.
Product Features
- Integrated Swivel Head: Helps prevent twisting and binding during innerduct installation.
- Combined Tool Design: Integrates a pulling eye and swivel, eliminating the need for a separate swivel at each pulling eye.
- Compact Configuration: Short length is advantageous when pulling through tight conduit bends.
- Installation: Installs using a 1.375" deep socket or adjustable wrench.
- Innerduct Applications: Suitable for individual innerduct runs or multiple innerducts installed into one conduit.
- Three Size Options: Available in nominal 1"–1.25", 1.5", and 2" configurations.
- Harness Compatibility: Compatible with Condux pulling harness legs, according to the manufacturer.
Documentation
Ordering Information
| Part Number | Nominal Size (in) | Innerduct I.D. Range (in) | Innerduct I.D. Range (mm) | Max O.D. (in/mm) | Hole Diameter D (in/mm) | Slot Width E (in/mm) | Slot Depth F (in/mm) | Pin Diameter G (in/mm) | Pin Center H (in/mm) |
|---|---|---|---|---|---|---|---|---|---|
| 08960712 | 1"–1.25" | 1.06–1.43 | 27–37 | 1.75 / 44 | .44 / 11 | .56 / 14 | 1.31 / 33 | .43 / 11 | .56 / 14 |
| 08960715 | 1.5" | 1.37–1.68 | 35–43 | 2 / 51 | .44 / 11 | .56 / 14 | 1.31 / 33 | .43 / 11 | .56 / 14 |
| 08960720 | 2" | 1.93–2.12 | 49–54 | 2.44 / 62 | .44 / 11 | .56 / 14 | 1.31 / 33 | .43 / 11 | .56 / 14 |
Replacement Clevis Pins
| Pulling Eye Part Number | Replacement Pin Part Number |
|---|---|
| 08960712 | 08081036 |
| 08960715 | 08081036 |
| 08960720 | 08081036 |
Compatible Accessories: All three swivel head innerduct pulling eyes are compatible with Condux pulling harness legs. Replacement clevis pin: 08081036.