808 Champion Swivel Replacement Clevis Pin | Slotted & Hex Head | Condux
Replacement Clevis Pin | For 808 Champion Swivels | Slotted & Hex Head | 5/8" through 3" — Product Overview
Keep your 808 Champion Swivel assemblies in service with factory Replacement Clevis Pins. Precision machined from stainless steel to the same tolerances as the original pin, each one restores a secure, full-strength connection for utility, telecom, and construction cable pulling work.
Pins are sized to the swivel they serve, not to themselves — select by the swivel size you are repairing. Both the standard slotted pin and the hex head pin are available, and the two are not interchangeable, so match the configuration of the swivel in hand. Use the fit reference table below to confirm the correct part number before ordering.
Key Features
- Factory Replacement: Machined to original specification for correct fit and full rated strength.
- Stainless Steel: Corrosion resistant for long service life in buried, vault, and outdoor conditions.
- Slotted or Hex Head: Available in both configurations. Slotted pins take a flat blade; hex head pins take a hex key.
- Fits 5/8" through 3" Swivels: Covers the full 808 Champion range, including every hex head model.
- Field Serviceable: Pins replace in minutes without removing the swivel from the pulling assembly.
- View 808 Champion Swivels Here > LINK
Usage Guidelines
- Match the Configuration: Slotted and hex head pins are not interchangeable. Confirm which your swivel uses before ordering.
- Select by Swivel Size: The size shown on each option is the swivel it fits, not the length of the pin.
- Not for Bullwheels: 808 Champion Swivels are not designed to run around bullwheels or sheaves, and are for cable stringing or pulling only — not directional drilling.
Fit Reference
Select the pin that matches both the size and the pin configuration of your 808 Champion Swivel.
| Swivel Size | Swivel Part Number | Pin Configuration | Replacement Pin Part Number |
|---|---|---|---|
| 5/8" | 08017000 | Slotted | 08017016 |
| 7/8" | 08016000 | Slotted | 08955408 |
| 7/8" | 08016000H | Hex | 08081065 |
| 1-1/4" | 08080912 | Slotted | 08081046 |
| 1-1/4" | 08080912H | Hex | 08081042 |
| 1-3/8" | 08080913 | Slotted | 08081036 |
| 1-3/8" | 08080913H | Hex | 21000371 |
| 1-5/8" | 08080916 | Slotted | 08081026 |
| 1-5/8" | 08080916H | Hex | 21000381 |
| 2" | 08080920 | Slotted | 08081016 |
| 2" | 08080920H | Hex | 21000391 |
| 2-1/2" | 08080925 | Slotted | 08081006 |
| 2-1/2" | 08080925H | Hex | 21000401 |
| 3" | 08080930 | Slotted | 08081053 |
Documentation:
Note: Confirm the swivel size and pin configuration before ordering. Slotted and hex head pins are not interchangeable.