Aluminum Test Slugs | Duct Integrity Testing
Aluminum Test Slugs | Duct Integrity Testing — Product Overview
Aluminum Test Slugs are duct testing tools designed to be pulled through conduit to check duct joint integrity and identify out-of-round duct sections.
These aluminum test slugs are available for 1", 1.25", and 1.5" duct sizes. Each model has a manufacturer-specified body length, maximum outside diameter, and load capacity to support proper product selection.
Select the appropriate aluminum test slug based on the duct size and manufacturer part number. The three available configurations are identified in the Ordering Information table below.
Product Features
- Duct Integrity Testing: Designed to be pulled through duct to check joint integrity.
- Out-of-Round Duct Detection: Helps identify duct sections that may not maintain the intended round profile.
- Aluminum Construction: Aluminum test slug design for duct testing applications.
- Three Duct Sizes: Available for 1", 1.25", and 1.5" duct configurations.
- Manufacturer Specifications: Each model has a published maximum outside diameter, body length, and 2,200 lb (9,786 N) load capacity.
How to Select
- Duct Size: Identify the nominal duct size to be tested.
- Maximum Outside Diameter: Check the slug's published maximum O.D. against the intended testing application.
- Manufacturer Part Number: Match the required configuration to the correct Condux MPN.
Ordering Information
The following table contains the three Aluminum Test Slug models currently offered in this listing. All dimensions and load capacities follow Condux's published specifications.
| Part Number | Duct Size (in) | Duct Size (mm) | Body Length (in) | Body Length (mm) | Max O.D. (in) | Max O.D. (mm) | Load Capacity (lbs) | Load Capacity (N) |
|---|---|---|---|---|---|---|---|---|
| 08059005 | 1" | 25 | 1.71" | 43 | .860" | 22 | 2,200 | 9,786 |
| 08059015 | 1.25" (1-1/4") | 32 | 2.17" | 55 | 1.086" | 28 | 2,200 | 9,786 |
| 08059025 | 1.5" (1-1/2") | 38 | 2.49" | 63 | 1.243" | 32 | 2,200 | 9,786 |
Ordering Note: Confirm the required duct size and maximum outside diameter before selecting an Aluminum Test Slug. Refer to the manufacturer's specifications and instructions for the intended testing application.