Winch Line Duct Adapters | Cable Pulling
Winch Line Duct Adapters | Cable Pulling — Product Overview
Winch Line Duct Adapters are split threaded adapters designed for use with the Condux Winch Line Blower system. They are available in multiple sizes to accommodate different duct configurations during the installation of winch line, rope, or pulling tape through conduit.
Each adapter is selected according to the required duct size and inside-diameter range. The split threaded configuration is part of the winch line blower assembly, which uses compressed air to move pulling line through suitable conduit.
This listing offers eleven adapter sizes, from .75" through 6". Each option is identified by its Condux manufacturer part number to support accurate product selection.
Important: These duct adapters are not intended for use in steel conduit.
Product Features
- Split Threaded Design: Adapter configuration designed for use with the Condux Winch Line Blower system.
- Multiple Duct Sizes: Available in eleven listed sizes ranging from .75" to 6".
- Duct I.D. Selection: Individual adapters are identified by their corresponding duct inside-diameter ranges.
- Winch Line Installation: Used as part of a compressed-air blower system for installing winch line, rope, or pulling tape through conduit.
- Steel Conduit Restriction: Not intended for use in steel conduit, as specified by the manufacturer.
Ordering Information
Select the appropriate Winch Line Duct Adapter based on the required nominal duct size and inside-diameter range. The following table lists the eleven options currently offered in this Shopify listing.
| Part Number | Description | Duct I.D. Range |
|---|---|---|
| 08201108 | Winch Line Duct Adapter .75" | .83" – .93" |
| 08201110 | Winch Line Duct Adapter 1" | .90" – 1.13" |
| 08201112 | Winch Line Duct Adapter 1.25" | 1.25" – 1.40" |
| 08201115 | Winch Line Duct Adapter 1.5" | 1.40" – 1.65" |
| 08201020 | Winch Line Duct Adapter 2" | 1.91" – 2.10" |
| 08201025 | Winch Line Duct Adapter 2.5" | 2.29" – 2.47" |
| 08201030 | Winch Line Duct Adapter 3" | 2.83" – 3.10" |
| 08201035 | Winch Line Duct Adapter 3.5" | 3.25" – 3.60" |
| 08201041 | Winch Line Duct Adapter 4" | 3.80" – 4.06" |
| 08201051 | Winch Line Duct Adapter 5" | 4.71" – 5.08" |
| 08201061 | Winch Line Duct Adapter 6" | 5.61" – 6.10" |
Duct I.D. ranges per the Condux 2025 catalog.
Ordering Note: Verify the applicable duct inside diameter and select the matching manufacturer part number. Follow the Condux Winch Line Blower installation instructions for equipment setup and operation.
Compatibility Warning: Not for use in steel conduit.