Rubber Projectiles | Cal Missile Duct Projectiles | Pneumatic Line Carriers
Rubber Projectiles | Cal Missile Duct Projectiles | Pneumatic Line Carriers — Product Overview
Rubber Projectiles (Cal Am’s Cal Missile™ duct projectiles) are engineered to pneumatically run pull-lines through raceways for fast, reliable installation. Built for exposed and underground conduit applications, they blow efficiently through long runs and even out-of-round duct, helping crews pull mule tape and prep conduit for cable installs.
Each Cal Missile features a highly engineered polymer body with two or three polyurethane cups for smooth, low-friction travel and long service life. The cups are designed to resist solvents, oxygen, ozone, and sunlight for outstanding durability. Dual fastening rings (one on each end) create versatile tie-points for mule tape or pull lines, and make for an easy pull-back when needed.
Also referred to as: Dart Blowers, Duct Projectile, Line Carriers, Conduit Carriers, Torpedoes, Parachutes, Darts
Note: Only specific sizes are optimized for SDR 11 duct (marked in the table below). All other sizes are standard duct projectiles.
Key Features & Benefits
- Fast Pneumatic Pull-Line Runs – Efficient for long duct runs and out-of-round pathways.
- Durable Rubber Cone Design – Flexible cones built for many repeated uses.
- Ultra Tough & Tear Resistant – Built to outlast typical line carriers in demanding conditions.
- Secure Tie-Off Points – Dual fastening rings provide reliable mule-tape and pull-line attachment.
- Weather & Chemical Resistance – Polyurethane cups resist solvents, oxygen, ozone, and sunlight.
- Easy Pull-Back – Designed for smooth retrieval and repeat use.
- Multiple Sizes Available – Trade sizes from 1" through 8" to match common duct/conduit IDs.
Ideal for telecom, electrical, and utility contractors, these Rubber Projectiles / Cal Missile duct projectiles deliver clean, predictable performance when installing mule tape, running pull-lines, or clearing duct prior to cable placement.
Documentation
Specifications
| Product Number | Trade Size (in) | Trade Size (mm) | Typical Conduit Inner Diameter (in) | SDR 11-Specific? | Unit of Measure |
|---|---|---|---|---|---|
| 2110-010 | 1.00 | 25 | 0.874 | — | Each |
| 2110-011 | 1.25 | 32 | 1.250 | Yes | Each |
| 2110-012 | 1.25 | 32 | 1.176 | — | Each |
| 2110-013 | 1.375 | 35 | 1.350 | — | Each |
| 2110-014 | 1.50 | 40 | 1.230 | Yes | Each |
| 2110-015 | 1.50 | 40 | 1.295 | — | Each |
| 2110-017 | 1.875 | 48 | 1.905 | — | Each |
| 2110-019 | 2.00 | 50 | 1.610 | Yes | Each |
| 2110-020 | 2.00 | 50 | 1.839 | — | Each |
| 2110-025 | 2.50 | 65 | 2.222 | — | Each |
| 2110-030 | 3.00 | 80 | 2.954 | — | Each |
| 2110-040 | 4.00 | 100 | 3.800 | — | Each |
| 2110-050 | 5.00 | 125 | 4.737 | — | Each |
| 2110-060 | 6.00 | 150 | 5.888 | — | Each |
| 2110-080 | 8.00 | 200 | 8.250 | — | Each |
* SDR 11-specific items are optimized for SDR 11 duct sizes.
Conduit inner diameter values are provided as a reference for common duct types and sizes. Actual conduit ID may vary by manufacturer, material, and wall thickness. Always verify conduit dimensions prior to installation.