FuturePath 7-Way MicroDuct | 18/14 mm | SILICORE | HDPE Reels
FuturePath 7-Way MicroDuct — Product Overview
FuturePath 7-Way MicroDuct is seven 18 mm OD / 14 mm ID HDPE MicroDucts factory-bundled under one polyethylene oversheath. One pull or bore places seven separate fiber pathways, so you can light one duct now and jet more cable into the spares later without trenching again.
Each MicroDuct is ribbed inside and lined with SILICORE® ULF, a co-extruded low-friction layer that cuts friction about 60% compared with plain HDPE, with no wet lubricant. It installs with the same tools and methods as standard conduit or innerduct.
Key Features
- Seven pathways, one install: seven 18/14 mm MicroDucts in a single bundle, color coded blue, brown, green, gray, orange, red and white.
- SILICORE® ULF lining: low-friction inner wall for longer cable jetting runs.
- Ribbed MicroDucts: internal ribs reduce cable contact and help airflow during jetting.
- Easy access: two ripcords open the .070" oversheath for branching, with no special branching box.
- Locate wire: insulated copper locate wire built into the bundle (#14 or #20, see options).
- Sequential footage print: permanent print with material, standards and footage markings.
- Standard installation: open trench, plow, directional bore, aerial, or pulled into existing conduit.
Ordering and Pricing
FuturePath is sold by the foot on full steel reels. Request a quote for pricing and lead time, or call (815) 337-8845. Other way counts, duct sizes, sheath colors, thicker oversheath and custom print are available to quote.
Available Options
| Part No. | Sheath | Locate Wire | Reel |
|---|---|---|---|
| 10010412 | Orange | #14 copper | 3,500' steel reel, 96" x 42" |
| 10097256 | Gray | #14 copper | 3,500' steel reel, 96" x 42" |
| 10013396 | Orange | #20 copper | 5,000' steel reel, 114" x 42" |
Specifications (7-Way, 18/14 mm)
| Spec | Value |
|---|---|
| Bundle nominal OD | 2.27" |
| MicroDuct OD / ID | 18 mm / 14 mm (13.6 mm min. ID) |
| Oversheath | .070" polyethylene |
| Weight | .656 lb/ft |
| Min. bend radius | 52" during installation, 31" installed |
| Safe working pull strength | 3,522 lb |
| Recommended cable fill | 50% to 75% of MicroDuct ID |
| Standards | Telcordia GR-3155, ASTM D3350 |
Specifications from the manufacturer's FuturePath technical data sheet. Reels ship by freight.
