RED-WHITE VALVE CORP.  |  SKU: 30075312  |  MPN: 2420F 3/4

Hydronic Pump Flange Ball Valve | 2420F Series | EzPress x Flange

$33.20
Price per each (min. order qty 5)
Size | Connection Type
  • Three-Piece Full-Port Brass Body: DZR brass construction (UNS C35330) with full-port design and quarter-turn operation.
  • EzPress x Flange Connection: Press-end connection for installation using an appropriate pressing tool.
  • 600# WOG Valve Rating: Manufacturer-specified valve rating; press-connection operating limits must be verified separately.
  • Rotating Flange & Included Hardware: Manufacturer-listed rotating flange design with wing handle and bolt kit included.
  • PTFE Seats & O-Ring Seals: PTFE seat and packing ring with separately specified NSF-approved FKM and EPDM Perox O-rings.

2420F Series Pump Flange Ball Valve — EzPress x Flange

The 2420F is a three-piece, full-port brass pump flange ball valve with an EzPress end x flange connection and quarter-turn operation. Its body is made from dezincification-resistant (DZR) brass, UNS C35330. The manufacturer identifies a rotating flange design and specifies a 600# WOG valve rating. A wing handle and bolt kit are included. Available sizes are .75", 1", 1.25", 1.5" and 2".

Key Features

  • Three-Piece, Full-Port Construction: Brass valve assembly with a DZR brass body.
  • EzPress x Flange: Press connection at one end and a pump flange at the other.
  • Rotating Flange Design: Manufacturer-listed feature; see the technical drawing for size-specific configuration.
  • Quarter-Turn Operation: Lever-operated ball valve for open/closed service.
  • Included Hardware: Wing handle and bolt kit supplied with the valve.
  • Sealing Components: PTFE seat and packing ring; the manufacturer's materials table separately identifies NSF-approved FKM and EPDM Perox O-rings.

EzPress Installation Notes

RWV's installation instructions call for an appropriate crimping (pressing) tool and correctly maintained jaws. Cut and deburr the pipe, check the O-ring, and follow the tool manufacturer's instructions. Do not use lubricant or sealant on the EzPress end. The installer must verify suitability for the operating pressure, temperature, fluid and environment. The model-specific sheet lists 600# WOG but does not provide a separate press-connection pressure/temperature table; do not interpret the nominal valve rating as a verified press-joint rating.

Dimensions & Weights (inches, lb)

Dimension letters correspond to the manufacturer's technical drawing. Weights below are manufacturer-listed valve weights.

Size Φ A C H L P Weight (lb)
.75" 0.89 2.50 0.63 2.07 3.58 0.73 1.50
1" 1.14 2.81 0.75 2.36 4.96 0.94 1.92
1.25" 1.43 3.32 0.77 2.58 4.96 1.22 2.20
1.5" 1.64 3.70 0.77 2.87 5.55 1.46 2.80
2" 2.14 4.57 0.79 3.25 5.55 1.95 4.16

Materials & Specifications

No. Part Material Specification
1 Body DZR Brass UNS C35330
2 End piece Brass ASTM B283 C37700
3 End piece1 Brass ASTM B124 C37700
4 Ball Brass / Cr plated ASTM B30 C85700
5 Seat PTFE PTFE
6 Flange Brass ASTM B283 C37700
7 Stem Brass ASTM B124 C37700
8 O-ring FKM NSF approved
9 Packing ring PTFE PTFE
10 Packing nut Brass ASTM B124 C37700
11 Handle Steel / Dacromet® plated ASTM A36
12 Nut Steel / Zn plated ASTM A36
13 O-ring EPDM Perox NSF approved

1 End piece is listed only for 1.5" and 2" sizes in the manufacturer specification.

Manufacturer Reference

2420F Technical Specification (PDF)

⚠ California Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.