DURA-LINE  |  SKU: 30051502  |  MPN: 20002340

Shur-Lock II Coupler | No Center Stop | HDPE & PVC

$22.60
Size | NS
  • No Center Stop Design – Slides fully over conduit for confined space or repair applications
  • Multi-Conduit Compatibility – Joins HDPE, PVC, metal, and fiberglass with ease
  • Sealed for Protection – Pre-lubricated O-ring delivers a tight, pressure-rated seal
  • Quick Installation – Stainless steel band clamps install fast using a standard nut driver
  • Outdoor Ready – UV-resistant and built for high pull-out strength in rugged environments

Shur-Lock II Coupler | No Center Stop (NS) | For Repairs & Limited-Clearance Installs

Dura-Line Shur-Lock II No-Stop Couplers are designed for repairs and limited-clearance installations. The center stop is removed so the coupler can slide completely over the end of the conduit before being repositioned across the joint.

Shur-Lock II couplers can connect HDPE and PVC conduit and can also join dissimilar conduit materials, including threaded or non-threaded metal conduit and fiberglass (FRP). Stainless steel band clamps are tightened with a standard 5/16" nut driver. A pre-lubricated O-ring forms an air- and water-tight seal rated up to 125 PSI.

Listing note: Certain configurations are available with ETL listing for HDPE and PVC in underground and concrete-encased applications. Specify at time of order if ETL listing is required. Not for PVC above-ground use and not premise rated.

Key Features

  • No Center Stop: Slides fully over the conduit for repairs and limited-clearance installations.
  • Air- and Water-Tight: Pre-lubricated O-ring seal rated up to 125 PSI.
  • No Special Tools Required: Installs with a standard 5/16" nut driver.
  • Multi-Conduit Compatibility: For HDPE, PVC, metal, and fiberglass conduit.
  • No ID Reduction: Maintains the conduit pathway through the connection.
  • UV Resistant and Re-Enterable: Designed for utility conduit applications.
  • Pull-Out Strength: 600, 700, or 1,000 lb depending on size.

Specifications

Nominal Size Nominal OD Duct OD Working Range Pull-Out Strength Part #
1" 1.315" 1.295"–1.335" 600 lb 20002340
1-1/4" 1.660" 1.640"–1.680" 700 lb 20000236
1-1/2" 1.900" 1.880"–1.920" 700 lb 20002341
2" 2.375" 2.355"–2.395" 700 lb 20000237
2-1/2" 2.875" 2.855"–2.895" 1,000 lb 20000238
3" 3.500" 3.480"–3.520" 1,000 lb 20000239
4" 4.500" 4.480"–4.520" 1,000 lb 20000260
5" 5.563" 5.543"–5.583" 1,000 lb 20001531
6" 6.625" 6.605"–6.645" 1,000 lb 20000261