Turnbuckle Eye & Hook | Hot Dip Galvanized | 1/4" to 3/4"
Turnbuckle, Eye and Hook — hot dip galvanized drop-forged turnbuckle with an eye on one end and a hook on the other, for tensioning guy wire, cable and rope.
A turnbuckle takes the slack out of a line and holds it. The eye end anchors to a fixed point with a shackle, bolt or thimbled eye, and the hook end drops onto a link, ring or eye so the assembly can be connected and disconnected without tools. Turning the body draws the two ends together. Eye and hook is the quick-connect style; where the connection is permanent or must not release under a slack line, use the eye and eye or jaw and jaw pattern linked below.
Key Features
- Drop-forged steel, hot dip galvanized: for outdoor and buried-cable service
- Size is thread diameter x take-up: 1/4" x 4" through 3/4" x 12"; take-up is the working travel of the body
- Working load limits from 400 to 3,000 lb per the table below
- Sold by the case: case quantity in the table is the minimum order and the increment
- Other patterns: View Eye and Eye Turnbuckles Here > LINK
- View Jaw and Jaw Turnbuckles Here > LINK
Order Guide
| Part Number | Thread Dia. x Take-Up | Working Load Limit (lb) | Sold by the Case of | Weight Each (lb) |
|---|---|---|---|---|
| TBEH0804 | 1/4" x 4" | 400 | 200 | 0.31 |
| TBEH104.5 | 5/16" x 4-1/2" | 700 | 100 | 0.50 |
| TBEH1206 | 3/8" x 6" | 1,000 | 50 | 0.79 |
| TBEH1606 | 1/2" x 6" | 1,500 | 25 | 1.80 |
| TBEH1609 | 1/2" x 9" | 1,500 | 25 | 2.35 |
| TBEH1612 | 1/2" x 12" | 1,500 | 25 | 2.70 |
| TBEH2006 | 5/8" x 6" | 2,250 | 20 | 2.98 |
| TBEH2009 | 5/8" x 9" | 2,250 | 20 | 3.80 |
| TBEH2012 | 5/8" x 12" | 2,250 | 15 | 4.35 |
| TBEH2409 | 3/4" x 9" | 3,000 | 10 | 5.58 |
| TBEH2412 | 3/4" x 12" | 3,000 | 10 | 6.52 |
Working load limits are for in-line tension loading per the Erin Rope cut sheet. Ships from the manufacturer in full cases; the case quantity is the minimum order and the order increment for each size. Hook-end turnbuckles are not for overhead lifting. Never load a hook at its tip; use a latched hook or an eye pattern where a load could slacken and release.