CONDUX | SKU: 30051140 | MPN: 08201080

Winch Line Blower Body Assembly | 2"–6" Duct

$1,453.55

Winch Line Installation: Body component designed for a compressed-air system that propels winch line, rope, or pulling tape through suitable conduit.
2"–6" Duct Systems: Listed for 2"–6" duct applications with compatible split threaded adapters sold separately.
Included Venturi Set: Supplied with a 1/2"–9/16" rope venturi set.
Operating Requirements: Complete system uses a manufacturer-listed 90 PSI and 100 CFM air supply.
Pair With: Hose Valve Assembly LINK

Winch Line Blower Body Assembly | 2"–6" Duct Systems — Product Overview

The Winch Line Blower Body Assembly is the main body component of the Condux Winch Line Blower system. It is designed for installing winch line, rope, or pulling tape through underground conduit before cable-pulling operations. Using compressed air and compatible system components, the blower system propels the line through an unobstructed, unoccupied, airtight conduit run.

Part number 08201080 is listed for 2"–6" duct systems and includes a 1/2"–9/16" venturi set. The body is supplied with the included venturi set; split threaded duct adapters are sold separately and must be selected according to the intended duct configuration.

Key Features

Winch Line Installation: Designed as the body component of a compressed-air system for sending winch line, rope, or pulling tape through underground conduit.
2"–6" Duct Systems: Listed for use with duct systems ranging from 2" to 6", with compatible adapters selected separately.
Included Venturi Set: Supplied with a 1/2"–9/16" rope venturi set.
System Compatibility: Designed to work with compatible duct adapters, carriers, missiles, and air-control components.
Multiple Installation Applications: Supports winch line, rope, and pulling tape installation through suitable conduit.
Pair With: Hose Valve Assembly LINK

System Operating Information

Specification	Manufacturer Information
Product Type	Winch Line Blower Body Assembly
Part Number	08201080
Listed Duct Size	2"–6"
Included Venturi Set	1/2"–9/16"
System Air Pressure	90 PSI (6.2 bar)
System Air Flow	100 CFM (2.8 CMM)
Split Threaded Adapters	Sold separately

Operating Note: The 90 PSI and 100 CFM specifications refer to the Winch Line Blower system, not an independently rated performance specification for the body assembly. Follow the manufacturer manual for compressor selection, system setup, and operation. Do not exceed the manufacturer's maximum system pressure.

Conduit Compatibility

The Condux Winch Line Blower system is designed for use with PVC and polyethylene conduit. The manufacturer does not recommend its use with steel conduit, fiberglass, concrete, or other non-plastic conduit types.

Suitable Materials: PVC and polyethylene conduit.
Conduit Condition: The conduit run must be unobstructed, unoccupied, and airtight.
Application: Installing winch line, rope, or pulling tape before subsequent cable-pulling operations.
Adapter Selection: Select the appropriate split threaded adapter for the duct size and application.

Included Components & Sold-Separately Accessories

Included with Part Number 08201080:

Winch Line Blower Body Assembly.
1/2"–9/16" venturi set.

Sold Separately:

Split threaded duct adapters.
Additional venturi sets.
Rope adapter (MPN 08201091).
Hose and valve assembly (MPN 08201015).
Compatible line carriers and other required system components.

Accessory Note: The Winch Line Blower Body Assembly does not include all components needed to configure a complete blower system. Confirm the required adapters and compatible accessories before ordering.

Quick & Easy Rope Installation Guide

Step 1: Attach winch line or rope to the carrier.
Step 2: Install the carrier into the duct.
Step 3: Close the adapter around the winch line or rope and insert it into the duct.
Step 4: Install the Winch Line Body and tighten the clamp.

Fast & Effective Pulling Tape Installation Guide

Step 1: Replace the Rope Plug with the Rope Adapter.
Step 2: Thread the pulling tape through the Rope Adapter.
Step 3: Attach the cable chute line carrier to the pulling tape.
Step 4: Install the carrier into the duct.
Step 5: Close the adapter around the tape and cable, then install it into the duct.
Step 6: Attach the body to the adapter, tighten it, and run the existing cable through the back.

A Look Inside!

Condux Winch Line Blower Body Open View

Important Safety Information

WARNING: Read and understand the Condux Winch Line Blower System User Guide and Safety Manual before installing or operating the equipment.

Electrical Safety: Observe the manufacturer's live-circuit warning and ensure the work area is safe before operation.
Access Vault Safety: Personnel must remain outside the starting and exit utility service access vaults during the blowing procedure.
Pressure Limit: Do not exceed 90 PSI system pressure or tamper with the pressure-relief valve.
Conduit Preparation: Confirm that the conduit is unobstructed, unoccupied, airtight, and suitable for the system.
Equipment Inspection: Inspect equipment and connections before use and follow the manufacturer's installation and operating procedures.

Failure to follow the manufacturer's safety and operating instructions can result in serious injury or equipment damage.

Manufacturer Documentation:

Ordering Information

Part Number	Description
08201080	Winch Line Body Assembly 2"–6". Includes 1/2"–9/16" venturi set. Split threaded adapters not included.